Profiling - Xante ScreenWriter Colour ScreenWriter User Manual

For example, if you are printing at 95 lpi using cyan and
magenta, locate the 95 LPI box on the Screen Calibration page
(fig. 4.35). In the Cyan column if the color disappears in box 5,
enter 5 in the C: values box in the Enhanced Screen
Calibration window (fig. 4.34). If the color in the magenta
column disappears in box 4, enter 4 in the M: value box of the
window.
5. Enter the job's lpi in the LPI box (fig. 4.34). Then, click
Update to send the new values to the printer.
6. Click Close (fig. 4.34). The Enhanced Screen Calibration
window closes. Then, select File: Exit. Command Center
closes.

Profiling

ICC Profiling allows you to select an ICC profile to use for system
level, device independent color management. This allows
exchanging and matching color information between input devices,
monitors, printers, and applications. An individual profile contains
information about a specific device's color reproduction capabilities.
This profile procedure is only for the XANTÉ Colour ScreenWriter
Pro printer when using ColourMatch software to build profiles or
using XANTÉ supplies custom profiles.
To download or delete source and destination profiles, use XANTÉ
Command Center.
1. Open Command Center.
2. Select Controller: ICC Profiling. The ICC Profiling window
appears (fig. 4.36). Then, proceed to the following appropriate
step.
— To download a source profile, continue to step 3.
— To delete a source profile, skip to step 4.
— To download a destination profile, skip to step 5.
4-44 PC Setupbb __________________________________________