Table of Contents
Advertisement
2.
Select the folder on your Macintosh that contains the font files
from the drop down menu on the top left of the window. The
large box on the left displays the fonts in the selected folder.
3.
Select Memory or Disk from the Device menu as the
destination for the downloaded fonts.
Note: If more than one optional hard disk is attached to your
printer, select the target disk from the drop-down
menu.
4.
Highlight a single font in the list on the left and click Add or
click Add All to select all of the fonts in the open folder. The
selected font(s) will appear in the list on the right of the screen.
Note: To remove fonts from the selected list (on the right of
the screen), highlight the fonts and click Remove.
5.
Click Download to send the selected fonts to the printer.
6.
Wait until download is complete; then, select File: Quit to
close the Adobe Downloader.
Reviewing and Removing Downloaded Fonts
1.
Open the Adobe Downloader and select Special: Printer Font
Directory. The following window appears (fig. 3.26).
Where would you like the directory sent?
Fig. 3.26 Directory Location Window
_____________________________________
Screen
Printer
OK
Cancel
Macintosh Setup 3-43
Advertisement
Table of Contents
Troubleshooting
