EEROM Configuration
XANTÉ Command Center's Controller menu offers a Configure
option that allows you to find out the EEROM settings for a
particular printer. You can save these settings to a file and later
reload them to that printer or to another printer.
To use the Configure feature
1.
Open XANTÉ Command Center and select Controller:
Configure. The Configuration window appears (fig. 4.32).
Fig. 4.32 Configuration Window
2.
Click Get Configuration. A configuration message window
appears letting you knowhow many configurable items are in
the controller.
Note: Because there are many configurable items, it may
take a long time to load this information. If you do not
want to do this at this time, click Cancel to quit.
3.
Click Ok in the configuration message window to continue.
Information uploads 10 items at a time.
___________________________________________
PC Setup 4-41