Adobe PostScript Printer Drivers
Before using your printer, you must install the Adobe PostScript
driver and your printer's PPD.
XANTÉ Utilities Installer launches the installation program for the
most recent Adobe PostScript printer driver on systems running
Windows NT 4.0.
This section describes loading the printer driver manually for each
operating system and starting the installer. See "XANTÉ Utilities
Installer" earlier in this chapter to load XANTÉ Utilities manually.
See "PDFs Folder" later in this chapter to load QuarkXPress PDF
files manually.
Deleting Previous Driver Versions
Normally, you do not have to delete previous Adobe PostScript
printer drivers or any previously installed Adobe PostScript printers.
However, if you suspect installation problems, first remove your
installed printer(s) from the Printers dialog box in the Windows
Control Panel and reinstall them via the Adobe PostScript Printers
dialog box which is also in the Windows Control Panel.
If after removing and reinstalling your printers, you still experience
problems, delete all previous driver versions and reinstall your
printer(s) using the Adobe PostScript Printers dialog box.
Deleting AdobePS 4.1.X and Later
To delete Adobe PS 4.1.X or later versions of the driver
1.
Open Windows. Select Start: Programs: Windows Explorer.
The Windows Explorer main window opens.
___________________________________________
PC Setup 4-9