Table of Contents
Advertisement
My printer does not respond properly to my PC using a parallel
connection.
•
Make sure all cables are connected and seated properly.
See "Connecting to the Parallel Port" in chapter 2.
•
Make sure the correct Adobe PostScript printer driver and
your printer's PPD are installed and configured properly.
See "Adobe PostScript Printer Drivers" in chapter 4.
•
Make sure the parallel port is enabled on the printer. See
"Interface Control" in chapter 6.
Note: If printing binary data, make sure the parallel
•
Make sure the printer is online. See "Interface Control" in
chapter 6.
•
Make sure the previous job has been cleared from the
printer by sending an end-of-job marker using the D.PS
file. See "PS_Files Folder" in chapter 4.
•
Set the data format to ASCII in your application.
My printer does not respond properly to my PC using a serial
connection.
•
Make sure all cables are connected and seated properly.
See "Connecting to the Serial Port" in chapter 2.
•
Make sure the correct Adobe PostScript printer driver and
your printer's PPD are installed and configured properly.
See "Adobe PostScript Printer Drivers" in chapter 4.
•
Make sure the parallel port is enabled on the printer. See
"Interface Control" in chapter 6.
•
Make sure the printer is online. See "Interface Control" in
chapter 6.
•
Make sure communication settings in your application,
printer, and PC match. See "Interface Control" in chapter 6.
_____________________________________ Troubleshooting 11-15
mode is set to PS TBCP.
Advertisement
Table of Contents
Troubleshooting
