Table of Contents
Advertisement
•
Optional Lower Tray must be set to agree with your printer
and Chooser or Windows configuration to allow you to select
the lower tray as the media source. This option does not have
to be selected to use the PageMaker TraySwitch option.
•
TraySwitch allows you to select the printer's tray chaining
feature on a per job basis. Printer's Default uses the printer
front panel setting. True and False enable or disable tray
chaining for the current job, regardless of the front panel
setting.
Check the Paper menu of the print dialog box. Select the appropriate
paper size and source for the job. The paper size must match the size
of the paper installed for the job to print correctly.
AutoCAD 12 for PostScript
AutoCAD is an engineering design package. This section covers
configuring AutoCAD to print to your printer and once that is done,
printing from AutoCAD.
Configuring AutoCAD 12
After you install AutoCAD release 12, configure the program to print
using the following procedure.
1.
Select File: Configure. A Configure menu appears.
2.
Select Configure plotter. The Plotter Configuration menu
appears.
3.
Select Add a plotter configuration. The Available Plotters
screen appears.
4.
Select Postscript Device ADI 4.2 - by AutoDesk, Inc.
5.
Under Supported Models, select 300 dpi. The question "Do
you want color?" appears.
A-10 Application Notes and Page
Designbb
_____________________
Advertisement
Table of Contents
Troubleshooting
