Xanté Command Center; General Menu - Xante ScreenWriter Colour ScreenWriter User Manual

SET_IP.PS allows you to set your printer's IP address. Open the file
in a text editor, such as SimpleText, and change the IP address in the
parentheses to your printer's IP address. Save and download the file
to your printer. Restart the printer to make the change effective.
STARTPG.OFF disables the printer's start-up page feature,
preventing the page from printing automatically each time the printer
is restarted (see "Start-up Page" in chapter 6).
STARTPG.ON enables the printer's start-up page feature, causing
the page to print automatically each time the printer is restarted (see
"Start-up Page" in chapter 6).
SYSPARM.PS prints a list of current system parameters.
XANTÉ Command Center
XANTÉ Command Center allows you to check and control many
printer functions from your Macintosh. Use XInstaller to install
Command Center or copy the program from the CD-ROM's XANTÉ
Utilities folder to a folder on your Macintosh.
The File and Edit menus are similar to other Macintosh applications
and are not described in detail in this section.

General Menu

The General menu allows you to communicate with the printer to
perform margin adjustment, get printer settings and status, download
PostScript files to the printer, and change some printer default
settings (fig. 3.6).
_____________________________________ Macintosh Setup 3-21