8.
Remove the left side cover from the printer by pulling the front
edge free, pivoting the cover to the back and sliding its notch
free from its securing peg (Fig. 10.15).
Side Cover (L)
Fig. 10.15 Remove the Side Cover
9.
Connect the duplexer cable to the printer's black duplexer
connector (fig. 10.16). Then, reattach the left side cover to the
printer (fig. 10.15).
LFU Connector
(Lower White)
LFU Cable
Duplexer Cable
Fig. 10.16 Connect the Duplexer Cable
10-16
Optionsbb
__________________________________________
Notch
Peg
Notch
Duplexer Connector
(Upper Black)
Printer Side
LFU Side