Xante ScreenWriter Colour ScreenWriter User Manual page 356

Output colors are not right.
Output is not as glossy as it should be.
Colors are mixing on my output.
Two colors on my output are misregistered.
11-18 Troubleshootingbb
• One or more of the toner cartridges may not
be seated properly. Reinstall the cartridges.
See "Removing and Installing a Toner
Cartridge" in chapter 2.
• The fuser cleaning roller may be stained and
need replacement or the fuser roller may
need to be replaced. For replacement
information, contact XANTÉ; see
"Technical Support" at the end of this
chapter.
• Make sure that the toner cartridges are fully
seated in the printer and the printer's front
cover is closed completely. See "Removing
and Installing a Toner Cartridge" in chapter
2.
• Check the toner cartridge(s) for damage and
replace if necessary. See "Removing and
Installing a Toner Cartridge" in chapter 2.
• The OPC belt cartridge may not be seated
properly. Reinstall it. See "Removing or
Installing the OPC Belt Cartridge" in
chapter 2.
• The OPC belt cartridge may be damaged.
Replace it. See "Removing or Installing an
OPC Belt Cartridge" in chapter 2.
____________________________________