To use Enhanced Screen Calibration
1.
Open XANTÉ Command Center. Then, select Enhanced
Screen Calibration from the Controller menu (fig. 4.33). The
Enhanced Screen Calibration window appears (fig. 4.34).
Fig. 4.33 Controller Menu
2.
Click Print Calibration Page. A page similar to the following
prints (fig. 4.35).
Fig. 4.35 Sample XANTÉ Screen Calibration Page
3.
Locate the LPI setting box for the LPI that you are using on the
XANTÉ Screen Calibration page (fig. 4.35).
4.
Find the highest value for each color in the job where that
color can no longer be seen; then, enter that number in the box
next to its corresponding color in the Values box (fig. 4.34).
___________________________________________
Fig. 4.34 Enhanced Screen Calibration
PC Setup 4-43