Table of Contents
Advertisement
1.
Make sure the printer is on and idle.
2.
Press the MENU key until SETUP: GRAPHICS appears.
3.
Press the Enter key to enter the Graphics menu.
4.
Press the Menu key until GRAPHICS: DPI appears in the
window.
5.
Press the Enter key to enter the DPI menu.
6.
Press the Menu key until dpi: 600 600 appears.
7.
Press the Enter key to select 600 dpi as the default. The selection
changes to all capital letters, indicating that it is the current
default.
8.
Press the On Line key. READY/IDLE appears in the window.
The printer's default resolution is now 600 x 600 dpi.
Resetting to Factory Defaults
There are two levels for resetting to factory defaults: Level 1 (full
reset) and Level 2 (partial reset).
Level 1 Reset
Level 1 resets all printer options to factory default settings.
To perform a level 1 reset, turn off the printer; press and hold down
the Online, Test, and Duplex keys simultaneously; and then with the
keys still down, turn on the printer. Release the keys after RESET 1
appears in the window. The display will read initializing and then go
through the normal start-up sequence.
Level 2 Reset
Level 2 resets printer options to factory default settings except for
printer margins, Novell network print server parameters, IP network
parameters, and X-ACT settings.
6-6
Configurationbb
______________________________________
Advertisement
Table of Contents
Troubleshooting
