Xante ScreenWriter Colour ScreenWriter User Manual page 285

Connector
Thumb Screw
Metal Coupler 1
Fig. 9.23 Remove Metal Coupler 1 Fig. 9.24 Reattach LFU Connector Cover
7. Reattach the LFU connector cover by sliding the two small
bottom tabs in the base of its opening, rotating the cover up
and snapping the top tab into place (fig. 9.24).
Warning! The printer weighs approximately 101 lbs (46 kg)
without toner, cassettes, and media installed. Always
have two people lift the printer by the recessed grip
areas on the bottom sides.
8. Have someone help you lift the printer straight off the LFU
vertically until the printer is free of the alignment posts (fig.
9.25). Then set the printer on a stable surface that will support
its weight.
Fig. 9.25 Remove LFU from the Printer
_________________________
Back
Tab
LFU Connector Cover
Maintenance and Specifications 9-19
Left Side