Table of Contents
Advertisement
3)
Highlight Print Servers and press Enter.
4)
Press Insert and highlight the print server name
that you entered in step 4c and press Enter.
7.
Press Escape until the Exit PConsole dialog box appears.
8.
Highlight Yes and press Enter to exit from PConsole.
Now that the Novell Server is configured for NetWare 3.X and 4.X,
skip to "Configure the Print Server Emulation" later in this chapter.
Configure the Novell Server (NetWare 5.X)
Use XANTÉ Command Center to setup the Novell print server
name, the file server name of the Novell server, and the Printer
AppleTalk name if it is different. (See "Selecting the Novell Names"
earlier in this chapter for details.) Also use Command Center to
enable login and printing.
To configure the Novell server for NetWare 5.X
1.
Login to the Novell server as the administrator or equivalent.
2.
Run NWAdmin. A NetWare Administrator window similar to
the following appears (fig. 5.3).
Fig. 5.3 NetWare Administrator Window
_______________________________________
Ethernet Setup 5-9
Advertisement
Table of Contents
Troubleshooting
