Handling And Replacing The Toner Cartridge - Xante Accel-a-Writer 8200 Manual

4. Roll the density dial forward (up) to increase the density or
back (down) to decrease it (fig. 6.7).
5. Close the front cover.
6. Close the fold down tray if you are not going to use it, or load
media if you are going to use it.
7. Print a test file to check the density. If you want to make
further adjustments, repeat this process.
Note: Remember this dial is for fine adjustments only.
Handling and
Replacing the Toner Cartridge
Your Accel-a-Writer 8200 uses a standard EP-BII toner cartridge, or
if you purchased the extra wide print option, the printer uses the EP-
BIIX extra wide cartridge. Both cartridges combine the toner and the
drum, so you only have to replace one consumable. The EP-BII
averages 7500 letter/A4 size copies at 4% coverage; the EP-BIIX
averages 7000 copies at the same size and coverage. Also, the
cartridges load in the same manner.
When you handle the toner cartridge, keep the following in mind:
• Never move the printer with the toner cartridge installed.
• The toner cartridge is sensitive to bright lights and direct
sunlight. Leave it in its protective bag until you are ready
to load it into the printer.
• The cartridge contains a magnet, so keep it away from
your hard disk(s) and monitor to prevent possible data loss.
• When you store the cartridge, keep it lengthwise on a level
surface. Do not stand it on end or upside-down.
• Use a cartridge before its expiration date to maintain
maximum print quality.
___________________________________ Routine Operations 6-25