Table of Contents
Advertisement
The following features can be configured from the Print dialog box.
• Mirror Print
Note: Some applications require additional configuration to access
certain features. See your application documentation and the
appendix, "Application Notes and Page Design."
Configuring Printer Features
Printer interfaces and features are set using front panel keys and
menus, PPD options in your application Print dialog box, and
XANTÉ Command Center. This section describes available printer
features and their configuration.
AccelaFont
AccelaFont allows you to set aside a portion of RAM disk to store
fonts for quick system access. AccelaFont automatically loads the
most recently used fonts from the printer's optional hard disk into the
RAM disk. This eliminates time usually required to access fonts
from the hard disk. The AccelaFont menu is active only if fonts are
downloaded to an optional hard disk on the printer and RAM disk is
enabled for 1 MB or more.
Set AccelaFont from the UTILITY: ACCELAFONT configuration
menu. Options indicate the percentage of RAM disk that AccelaFont
can use. The factory default is 100%.
Accurate Calibration Technology (X-ACT)
X-ACT (XANTÉ's patented Accurate Calibration Technology)
allows you to calibrate your printer line lengths using the front panel
GRAPHICS: XACT menu.
_______________________________________
• Resolution
• Tray Switch
(PC Menu only)
Configuration 6-15
Advertisement
Table of Contents
Troubleshooting
