Changing The Toner Waste Pack - Xante ScreenWriter Colour ScreenWriter User Manual

Note: These levers control pressure on the two fuser rollers,
protecting them from damage during shipping.

Changing the Toner Waste Pack

You need to remove the old toner waste pack and replace it with a
new empty one to prevent old toner from spilling in the printer
during shipment.
Warning! Toner is combustible. Never dispose of it by
incineration.
1. Pull the toner waste pack out of the printer and seal it using the
label on the side of the pack (fig. 9.12). Dispose of the toner
pack following all safety laws and regulations in your area.
Toner Waste Pack
Fig. 9.12 Replace the Toner Waste Pack
2. Remove the new waste pack from its package and slide the
pack into the printer, making sure it seats into place (fig. 9.12).
3. Place the 6.5" (165 mm) x 1.75" (44 mm) piece of packing
foam vertically against the toner waste pack to secure it in
place (fig. 9.13); then close the front and top covers.
9-14 Maintenance and
Front Cover
Fig. 9.13 Place Packing Foam against
Specificationsbb ________________________
Top Cover
Packing Foam
the Toner Waste Pack