Downloads Folder - Xante ScreenWriter Colour ScreenWriter User Manual

Downloads Folder

The Downloads folder contains Adobe PostScript files and
Overview.pdf which describes these files. Download the PostScript
files to your printer using Adobe Downloader or XANTÉ Command
Center.
FONTS.PS3 prints a list of the Adobe PostScript 3 fonts resident on
XANTÉ PostScript 3 printers.
Note: You also can print this list using the front panel Setup:
Utility: Utility Pages: Font Names option.
FONTSAMP.PS3 prints samples of Adobe PostScript 3 fonts
resident on XANTÉ PostScript 3 printers.
Note: You also can print this list using the front panel Setup:
Utility: Utility Pages: Font Samples option.
FTP.PS prints instructions for uploading and downloading files to
XANTÉ's FTP (File Transfer Protocol) site.
INITDSK.PS file initializes hard disks attached to or installed in
your printer.
You must initialize a hard disk before it can be used to store
downloaded fonts. Initializing a disk erases all information stored on
the disk.
NOVELL34.PS prints instructions for setting up a XANTÉ printer
on a Novell network.
PARMDUMP.PS prints a list of settings for communication devices
currently configured for your printer.
SETZONE.PS allows you to set your printer's EtherTalk zone
name. Open the file in a text editor, such as SimpleText, and change
"name of zone" in the parentheses to the name of your EtherTalk
zone. Save the file and download it to your printer. Restart the
printer to make the change effective.
3-20 Macintosh Setupbb ____________________________________