Xante ScreenWriter Colour ScreenWriter User Manual page 366

Repetitive defects appear on the printed media.
Some characters are missing or only partially printed.
Toner on the printed media smears when rubbed.
Instead of my image (or text), the output is a blank page.
11-28 Troubleshootingbb
• The paper path may be dirty. Print several
blank sheets to clean the path. If necessary,
clean the printer. See "Cleaning the Printer" in
chapter 9. Use the paper cassette cover to
prevent dust and debris from settling on the
paper and getting into the printer.
• The toner cartridge may need replacing. See
"Toner Cartridge" in chapter 2.
• The media may not meet the requirements in
"Media Specifications" in chapter 7. If
necessary, replace the media. See "Paper
Cassette" in chapter 2.
• The toner cartridge may need replacing. See
"Toner Cartridge" in chapter 2.
• Media may be damp or otherwise damaged.
Make sure media meets the requirements in
"Media Specifications" in chapter 7. If
necessary, replace the media. See "Paper
Cassette" in chapter 2.
• The fuser may not be working properly. The
printer displays the E: FUSER status message
if there is a hardware problem with the fuser.
• The printer may feed two or more sheets of
media at a time. Reduce the size of the media
stack. See "Paper Cassette" in chapter 2.
____________________________________