Removing An Lfu (Lower Feeder Unit) - Xante ScreenWriter Colour ScreenWriter User Manual

5. Replace the printer's two upper caps by inserting their bottom
tabs into the slots on the printer and then rotating the caps up
until their top tabs snap into place (fig. 9.18).
6. Replace the media exit cover by inserting its bottom hooks into
the slots on the printer and then rotating the cover up until the top
tabs snap into their corresponding slots on the printer (fig. 9.18).

Removing an LFU (Lower Feeder Unit)

1. Remove any installed media cassette by pulling the cassette out
until it stops, lifting it up slightly and removing it from the printer.
Then, remove any media from the cassette.
2. Remove the fuser unit by loosening the units two securing
thumbscrews and lifting the fuser unit straight up and out of
the printer (fig. 9.19).
Caution:
Thumbscrews
Handles
Fuser Unit
Fig. 9.19 Remove Fuser Unit
_________________________
Make sure the oil bottle is removed before you
remove the fuser unit to prevent fuser oil spills.
See "Remove the Oil Bottle and Cleaning Roller"
earlier in this chapter for details.
Notch
Top Cover
Side Cover (L)
Fig. 9.20 Remove LFU Side Covers
Maintenance and Specifications 9-17
Peg
Notch
Side Cover (R)