Common Specifications For All Densities; Supported Densities And Organizations - Xante ScreenWriter Colour ScreenWriter User Manual

Bank 0/0
Bank 0/1
Bank 1/0
Bank 1/1
Total RAM
The following are SODIMM specifications for your printer.
Note: If you purchase SODIMMs from a vendor other than
XANTÉ, you should test the RAM before purchasing
large quantities. XANTÉ tests show some vendor's
RAM, manufactured to specifications, is incompatible
with our printers. XANTÉ cannot guarantee the
performance of RAM sold by other vendors.

Common Specifications for all Densities

Module type: 72-pin SODIMM
Organization: x32
Parity: none
Power voltage: 3.3V
I/O voltage: 3.3V tolerant
Speed: 60 ns or better
Mode: EDO
Refresh: CAS before RAS
Contact: gold
Dimension: 2.3" (length) x 1.5" (max height)

Supported Densities and Organizations

Density Org
16 MB 4M x 32
64 MB 16M x 32 4M x 4 bit
___________________________________________
64 MB 64 MB
64 MB
______ ______
64 MB 128 MB
RAS/CAS
Config Addressing
4M x 4 bit 11/11
12/12
64 MB 64 MB
64 MB 64 MB
16 MB 64 MB
16 MB 64 MB
160 MB 256 MB
Quantity
8
8
Options 10-21