Table of Contents
Advertisement
12
Network Install: Windows
Network Connection
!
®
No Ethernet
cable is supplied with the printer. Use
an Ethernet cable with two twisted wire pairs and an
RJ45 plug.
= Test Button
= Status Light
Turn the printer off.
Connect your Ethernet cable to the network port on
the print server (3).
Connect the other end of the Ethernet cable to the
network port (4).
Turn the printer on and wait for the print server status
light to stop blinking.
Press the Test button on the print server.
A Configuration Sheet prints. This sheet contains
information you need to set up the printer on your
network.
10
®
Setting Up the Network
Installing the Printer Drivers
The printer drivers are located on the CD supplied with
the printer.
For Windows 2000:
\Drivers\Win2K\English\Pcldrv and/or \Psdrv
For Windows Me, 98, and 95:
\Drivers\Win9x\English\Pcldrv and/or \Psdrv
For Windows NT 4.0:
\Drivers\Nt40\English\Pcldrv and/or \Psdrv
Installing the Drivers on Client Computers
Clients with Windows 2000 & Windows NT 4.0:
Push Installation
Copy the driver files from the XANTÉ ColourLaser
21 CD (\Drivers\Nt40 or Win2K\English\Pcldrv or
Psdrv) to the network directory of your choice.
At the host computer, open Network Neighborhood,
then double-click the client computer on which you
wish to install the drivers.
Double-click the Printers folder, then click Add
Printer.
Make sure Print Server/[Computer Name] is
selected, then click Next.
Follow the Add Printer Wizard to add the drivers
from the network directory where you installed them
onto the selected client computer.
Click the driver to be installed, then click Next.
Click Next and follow the on-screen instructions to
complete the installation.
Repeat the process for each client computer, then do a
quick check of the client computers to be sure that the
driver was installed.
To view the XANTÉ Network User's Guide once it is
installed on your computer, click Start
XANTÉ Network User Guide
Guide.
®
®
®
Programs
Network User's
Advertisement
Table of Contents
