Table of Contents
Advertisement
Top Cover
Fixing Pins
Fig. 10.13 Install the Duplexer
a.
Open the duplexer's top cover.
b.
Hold the duplexer at a slight angle and align its fixing
pins with the LFU slots.
c.
Slide the fixing pins into their slots while rotating the
duplexer's top cover up into the printer until the
duplexer's top tabs snap into their corresponding printer
slots.
d.
Tighten the two duplexer thumbscrews to secure the
duplexer to the printer (fig. 10.14). Then, rotate the
duplexer's top cover up into place.
Duplexer
Thumb Screws
Fig. 10.14 Secure the Duplexer to the Printer
___________________________________________
Printer Slots
Top Tabs
LFU Slots
Printer
Duplexer Top Cover
Options 10-15
Advertisement
Table of Contents
Troubleshooting
