Interior Cleaning - Xante ScreenWriter Colour ScreenWriter User Manual

6. Clean the surface of the dust proof lens using clean, dry cotton
swabs.
7. Close the Optical lens cover.
8. Align the OPC belt Cartridge with the OPC guides and lower it
into the printer until you feel a slight resistance as the
cartridge's gear engages with the gear in the printer (fig. 9.36).
Then, pivot the OPC guides back down into their original
positions.
9. Align one of the toner cartridges with its color bay slot and
slowly slide the cartridge in until it stops, seating firmly in
place (fig. 9.36). Repeat this process with each of the other
three toner cartridges.
10. Close the printer's top and front covers. If you are not cleaning
other areas, reconnect any interface cables and the power cord;
then, turn on the printer.

Interior Cleaning

Required tools:
1. Turn off the printer and disconnect the power cord from the
power source. Then, wait 20 minutes to allow the fuser unit to
cool.
2. Open the printer's front and top covers and remove all
installed toner cartridges (fig. 9.36).
3. Pivot the OPC guides straight up toward the front of the printer
(fig. 9.36).
Caution:
9-34 Maintenance and
• Several clean, dry, lint-free cotton cloths
• A computer vacuum
Always open the front cover before removing the
OPC belt cartridge to prevent permanent damage
to the cartridge during removal.
Specificationsbb ________________________