Xante ScreenWriter Colour ScreenWriter User Manual page 123

b. Select the amount of RAM installed on your printer.
Windows 95, 98, and Me: use the VMOption and then
go to step 11.
Windows 2000 and NT 4.X: use Installable Options:
InstalledMemory; then, skip to step 13.
12. Select Yes for Send Control D after each job (Windows NT
4.13).
13. Click the Graphics tab and set the printer's default resolution
for the highest resolution available on your printer if you are
using Windows 95, 98, or Me. Set the printer's default
resolution for the highest resolution available on your printer
in the Device Settings: Installable Options: Resolution if you
are using Windows 2000 or NT.
14. Click the PostScript tab (fig. 4.15). This option is not available
in Windows 2000 or NT.
___________________________________________
Fig. 4.15 PostScript Tab
PC Setup 4-19