Clearing A Paper Exit Fuser Area Jam - Xante ScreenWriter Colour ScreenWriter User Manual

3. Close the back cover.

Clearing a Paper Exit Fuser Area Jam

1. Open the printer's top cover by pulling the cover's latch
forward and lifting the cover up and back (fig. 11.8).
Top Cover Latch
Fig. 11.8 Open the Top Cover
2. Remove any jammed media from inside the paper exit area
using the following procedure.
a. Push the fuser tension levers toward the back of the
printer to remove pressure from the media (fig. 11.9).
Top Cover
Media Jam
Fuser Tension Levers
Fig. 11.9 Open the Fuser Tension Levers
_____________________________________ Troubleshooting 11-37
Top Cover
Paper Exit Cover
MEDIA JAM OUTER
Status Message
MEDIA JAM OUTER
Status Message