Xante ScreenWriter Colour ScreenWriter User Manual page 345

E:H4 FUSER TEMP4
E:L1 BEAM DETECT
E:L2 SCANNER
E:LL LASER POWER
E:P1 DUPLEX P1
E:P3 FEEDER
E:P4 DUPLEX MOTOR
E:P5 OUTER PASS
E:P6 DUPLEX FAN
E:FIXING ROLLER
E:FUSER
E:LASER
E:MOTOR
_____________________________________
There is a fuser temperature 4
error. (Service)
There is a beam detector error.
(Service)
There is a scanner motor error.
(Service)
There is a laser power error.
(Service)
There is a duplex controller
hardware error. (Service)
There is a feeder pass select
solenoid error. (Service)
There is a duplex motor error.
(Service)
There is an outer pass select
solenoid error. (Service)
There is a optional fan error.
(Service)
There is a hardware problem
with the fuser. (Service)
There is a fuser error, such as a
temperature inaccuracy.
(Service #H0-4)
There is a hardware problem
with the laser. (Service #L1, L2,
LL)
There is a hardware problem
with the motor. (Service #E1-2)
Troubleshooting 11-7