Xante ScreenWriter Colour ScreenWriter User Manual page 277

Cleaner Cover
Tabs
Fig. 9.7 Remove the Drum Cleaner Cover and the Drum Cleaner
2. Grasp both ends of the top of the drum cleaner, lift one end up
first, lift the other end up, and pull the drum cleaner up out of
the printer; then, set it on a piece of clean paper (fig. 9.7).
3. Locate the toner auger; it is the black coiled rod in the front
bottom of the drum cleaner area (fig. 9.7).
Note: If you have a toner vacuum, use it to vacuum the toner
auger area.
4. Place the 16" x 2.75" (406 mm x 70 mm) angled bottomed
piece of packing foam over the auger opening (fig. 8).
Cleaner Cover
Drum Cleaner
Fig. 9.8 Place Packing Foam over the Auger Opening
_________________________
Drum Cleaner
Handle
Toner Auger
Packing Foam
Maintenance and Specifications 9-11
Paper Exit Cover