Table of Contents
Advertisement
Only a portion of my document printed.
Mechanical Issues
This section provides tips for resolving problems with the printer's
mechanical setup.
My printer stops printing periodically on long jobs.
•
These are the printer's automatic cool down cycles during
long, continuous jobs. Initially at approximately 200
planes (100 2-sided copies) the printer stops printing for
about 3 minutes. Then it pauses for cool down about every
50 planes until the job is finished.
My printer is making funny noises.
•
Make sure the printer is set up on a stable, level surface.
See "Printer Location" in chapter 2.
•
Make sure all covers on the printer are closed firmly.
•
Make sure all paper cassettes are seated properly. See
"Paper Cassette" in chapter 2.
•
There may be a foreign object in the printer. Turn off the
printer and remove the object. See chapter 2 for basic
setup and chapter 10 for optional paper feeder setup.
•
Make sure all rollers are installed and seated properly into
place.
11-30
Troubleshootingbb
•
Make sure the document size in your
application's Page Setup matches the
document size specified in the Print dialog
box.
____________________________________
Advertisement
Table of Contents
Troubleshooting
