Xante ScreenWriter Colour ScreenWriter User Manual page 301

4. Lift the OPC belt cartridge up out of the printer and place it in
its original protective bag or cover it with clean lint-free paper
to protect it from exposure to light.
Caution: Never touch the OPC belt's surface; handle the
cartridge only by its top handle. Place the cartridge
in its protective package or cover it with clean lint-
free paper while it is out of the printer to prevent
light exposure from permanently damaging it. If
the belt is overexposed to light (longer than two
minutes), there is a chance you may be able to
salvage it by placing it in a dark room for several
hours.
5. Remove the fuser unit by loosening the thumbscrews and
lifting the fuser unit straight up and out of the printer (fig.
9.38).
Caution: Make sure to keep the fuser unit level during
removal and while it is out of the printer to prevent
fuser oil spills.
Thumbscrews
Handles
Fuser Unit
Fig. 9.38 Remove the Fuser Unit
_________________________
Top Cover
Maintenance and Specifications 9-35