Screen Shape; Spot Function (Screen Type) - Xante ScreenWriter Colour ScreenWriter User Manual

Standard Monochrome
Standard Color
Screenprinting
Note: See "Printer Memory Requirements" in chapter 9 for RAM
requirements to print at higher resolutions.
Set available resolutions using either the front panel GRAPHICS:
DPI menu or your application's Print dialog box.
If a resolution upgrade is installed and adequate RAM is available,
but the upgrade cannot be selected in your application Print dialog
box (it is grayed out), RAM may not be configured properly in the
PPD. See the section on configuring the PPD for your operating
system in chapter 3 (Macintosh) or 4 (PC).

Screen Shape

Screen Shape allows you to select the shape of the dots that make up
your screen. Set this feature from the Print dialog box. Options
include Euclidean, Round, Line, and Ellipse.

Spot Function (Screen Type)

The Spot Function (Screen Type) feature allows you to select the
shape of the dots that make up the screen pattern for printing the
calibration and verification pages.
Set Spot Function using either the front panel GRAPHICS: SPOT
FUNCTION menu or the Linearization Screen Type option in
XANTÉ Command Center. See "Color Linearization (Calibration)"
in chapter 3 (Macintosh) or 4 (PC) for details.
Options are Euclidian (the factory default), Round, Line, and Ellipse.
_______________________________________
XANTÉ Colour ScreenWriter
Models
600 1200
1200 dpi 1200 dpi
600 dpi 1200 dpi
1200 dpi 1200 dpi
Configuration 6-31
Pro
1200 dpi
1200 dpi
1200 dpi