Removing A Duplexer - Xante ScreenWriter Colour ScreenWriter User Manual

Removing a Duplexer

If a duplexer is attached to your printer, it must be removed before
the printer is shipped.
1. Remove the LFU (Lower Feeder Unit) left side cover by
pulling its front edge free and pivoting the cover toward the
back of the printer; then, unplug the duplexer cable (figs. 9.14
and 9.15).
Note: If two LFUs are installed, only remove the top units
left side cover.
Notch
Peg
Side Cover (L)
Notch
Fig. 9.14 Remove Left Side Cover
2. Open the duplexer's top cover and loosen the two duplexer
thumbscrews (fig. 9.16).
Duplexer Top Cover
Fig. 9.16 Open the Top Cover and Loosen the Thumbscrews
_________________________
Duplexer Connector
LFU Connector
(Lower White)
LFU Cable
Duplexer Cable
Fig. 9.15 Unplug Duplexer Cable
Duplexer
Thumb Screws
Maintenance and Specifications 9-15
(Upper Black)
Printer Side
LFU Side
Printer