Using Pagemaker 6.0 And 6.5 - Xante ScreenWriter Colour ScreenWriter User Manual

the next section, "Using PageMaker 6.0 and 6.5," for details.)
Then, click Document to return to the Print dialog box.
7. Make any other desired selections in the Print dialog box. See
chapter 6, "Configuration," for details on printer options.
8. Click Print to send the job to the printer.

Using PageMaker 6.0 and 6.5

From the Print dialog box, select Features. Printer options that are set
through the Options menu in most applications are set through the
Features menu in PageMaker 6.0 and 6.5. See chapter 6, "PPD
Menus," for a description of printer features available through this
menu.
In addition to the standard printer options described in chapter 6,
PageMaker requires that the following options be set in the Features
menu of the print dialog box.
• Installed Memory must be set to match your printer and
Chooser or Windows configuration. Your printer's installed
resolution upgrade will not appear in the Resolution menu of
the PageMaker Features dialog box unless Installed Memory is
properly configured.
• Spooler Enabled must be set to True to enable the Save
Spooled Job menu under Features in PageMaker's Print dialog
box. The spooler must also be enabled for the interface you are
using (through the front panel or XANTÉ Command Center)
and configured in the Chooser or Windows configuration.
• Optional Duplexer must be set to agree with your printer and
Chooser or Windows configuration.
• Optional Upper Tray must be set to agree with your printer
and Chooser or Windows configuration to allow you to select
the optional upper tray as the media source. This option does
not have to be selected to use the PageMaker TraySwitch
option.
______________________ Application Notes and Page Design A-9