Table of Contents
Advertisement
2.
Choose Controller: Novell: Add File Server. The following
window appears.
Fig. 5.13 Add File Server Window
3.
Type in the name of the Novell file server that your printer will
poll for print jobs exactly as it appears in PConsole; then click
OK to return to the main menu.
Note: The printer enters a waiting state while it saves the file
server name. Do not proceed until the printer displays
the READY/IDLE message.
4.
If you did not use the printer's default Novell print server
name in the file server configuration with PConsole (in
"Configure the Novell Server (NetWare 3.X and 4.X)" see step
4c), change the print server login name to agree with the print
server name set up on the file server.
Note: If you used the printer's default Novell print server
name (see "Selecting the Novell Names" earlier in this
chapter) this step is not required.
a.
Choose Controller: Novell: Set Print Server Login Name.
The following window appears.
Fig. 5.14 Set Print Server Login Name Window
5-16 Ethernet Setup ________________________________________
Advertisement
Table of Contents
Troubleshooting
