Xante ScreenWriter Colour ScreenWriter User Manual page 299

Caution: Always open the front cover before removing the
OPC belt cartridge to prevent permanent damage
to the cartridge during removal.
4. Lift the OPC belt cartridge up out of the printer and place it in
its original protective bag or cover it with clean lint-free paper.
Caution: Never touch the OPC belt's surface; handle the
cartridge only by its top handle. Place the cartridge
in its protective bag or cover it with clean lint-free
paper while it is out of the printer to prevent light
exposure from permanently damaging it. If
overexposure occurs (longer than two minutes),
you may be able to salvage the cartridge by
placing it in a dark room for several hours.
5. Pull back on the optical lens cover's two tabs and rotate the
cover up and back (fig. 9.37).
WARNING Label
Tab
Optical Unit
Fig. 9.37 Open the Lens Cover and Clean the Lens
_________________________
Optical Lens Cover
Tab
Lens Cleaning Area
Maintenance and Specifications 9-33