Table of Contents
Advertisement
7
Install the Toner Cartridges
Unpack the black toner cartridge
and shake it back and forth.
Cyan
Carefully remove the tape.
Magenta
Yellow
Black
Lower the port end of the cartridge into the image drum
closest to the right end of the printer, so that the tube (1)
on the drum slides into the port (2) on the toner
cartridge.
Lightly press the cartridge against the image drum port,
then lower the lock lever end, aligning the white tab with
the groove in the drum.
Push the lock lever (3) to the left (toward the open
printer cover) until it stops.
!
To avoid damage to the printheads, be sure to push the
lock lever as far as it will go.
Repeat the process for each toner cartridge, being
careful to match the toner color to the drum
color.
!
Before closing the cover, check to be sure all the
toner cartridge lock levers (blue) are pushed
back as far as they will go.
Close the cover.
Port end (1).
Lock lever end (2).
7
Advertisement
Table of Contents
