Adjusting Print Density; Redistributing Toner - Xante Accel-a-Writer 8200 Manual

Adjusting Print Density

Usually, your printer produces rich, black images. However, if the
image is slightly darker or lighter than desired, you have two options:
• Redistribute toner in the cartridge.
• Make fine adjustments using the printer's density dial.
Since toner has the tendency to settle when not used for several days,
we suggest you try redistributing the toner first. If you still feel you
want to make an adjustment, use the density dial. Both of these
procedures are covered in this section.

Redistributing Toner

To redistribute toner in the cartridge
1. Open the fold down tray, or if it is already open and has media
loaded, remove the media.
2. Open the front cover by pulling the release latch and tilting the
cover back and down towards you.
3. Grasp the toner cartridge by the two green tabs and lift it out of
the printer.
Note: If the toner is running low, you may want to install a
new cartridge. If so, see "Handling and Replacing the
Toner Cartridge" later in this chapter for details.
6-22 Routine Operationsbb __________________________________