The Toner Cartridge - Xante Accel-a-Writer 8300 Introduction Manual

Hide thumbs Also See for Accel-a-Writer 8300:
Table of Contents

Advertisement

The Toner Cartridge

Your Accel-a-Writer 8300 ships with an EP-J toner cartridge. This
cartridge combines the toner and drum, so that you only have to
replace one consumable. The EP-J cartridge averages 8000 letter/A4
size copies at 4% coverage.
Caution:
The toner cartridge is sensitive to bright lights and direct
sunlight. Leave it in its protective bag until you are
ready to load it into the printer. To prevent data loss or
equipment damage, keep the cartridge, which contains a
magnet, away from your hard disk(s) and monitor.
This section describes how to remove an old toner cartridge and
install a new one. See chapter 7, "Media and Toner," for information
about adjusting toner density.
Caution:
Never move or ship the printer with a toner cartridge
installed. Toner spills can damage the printer.
1.
Open the top cover by pressing the release latch and tilting the
cover up and back (fig. 2.1).
2.
Grasp the old toner cartridge in the center, pull it up and out
(fig. 2.21), and dispose of it following safety laws and
regulations.
Warning!
The toner is highly combustible. Never dispose of it by
incineration.
2-24
Installationbb
_________________________________________

Advertisement

Table of Contents
loading

Table of Contents