Flow-Control - 3Com 8807 Command Reference Manual

Description
Use the display users command to view the information of the user interface.
Example
# Display the information of the current user interface.
<SW8800> display users
UI
+ 0
Table 5 Description on the fields of the display users command
Field
+
UI
Delay
Type
IPaddress
Username Display the name of the user using this user interface, namely the login username

flow-control

Syntax
flow-control { hardware | none | software }
undo flow-control
View
User interface view
Parameter
hardware: Configures to perform hardware flow control.
none: Configures no flow control.
software: Configures to perform software flow control.
Description
Use the flow-control command to configure the flow control mode on the user
interface.
Use the undo flow-control command to restore the default flow control mode.
By default, the value is none. That is, no flow control will be performed.
This command can only be performed in Console and AUX user interface view.
Example
# Configure software flow control on AUX port.
<SW8800>system-view
System View: return to User View with Ctrl+Z.
Delay Type Ipaddress
CON 0 00:00:00
Description
Current user interface is in use and work in asynchronous mode.
Number of the first list is the absolute number of user interface. Number of the
second list is the relative number of user interface.
Indicates the interval from the latest input till now in seconds.
User type
Displays initial connection location, namely the host IP address of the incoming
connection.
of the user.
Logging in to Switch Commands
Username
47