Error Messages; 2200 And 2400 Series - Micromeritics ASAP 2460 Operator's Manual

ASAP 2460 Operator's Manual
Program error messages are listed numerically. If the Action response indicates to contact a Micromer-
itics service representative, record the error message and make backup copies of any files involved in
the operation.
The 1000-series error messages, used primarily for software testing, are not included
in this appendix. These errors should not occur during normal operation. If a 1000-
series message appears, contact a Micromeritics service representative after making
backup copies of any files involved in the operation.

2200 and 2400 Series

2401- FATAL ERROR: (error message).
Cause:
Action:
2430- Error accessing file (file name), error code = (number).
Cause A:
Action A:
Cause B:
Action B:
2431- Error writing file (file name), error code = (number).
Cause:
Action:
246-42800-01 - Dec 2013
B. ERROR MESSAGES
An internal processing and/or hardware error has occurred.
Contact your service representative if you continue to receive this error
message.
A computer or network problem occurred.
Check the performance of your computer devices or network.
A software error occurred when the file was accessed.
Contact a Micromeritics service representative.
The hard disk does not have enough space left to perform the opera-
tion.
Copy files not used regularly from the hard disk to a diskette, CD, or
network directory, delete them from the hard disk, and then try the
operation again.
Appendix B
B-1