RSKRL78G1G
8. Code Development
8.1
Overview
For all code debugging using Renesas software tools, the RSK board must be connected to a PC via an
E1/E20 debugger. An E1 debugger is supplied with this RSK product.
For further information regarding the debugging capabilities of the E1/E20 debuggers, refer to E1/E20
Emulator Additional Document for User's Manual (R20UT1994EJ).
8.2
Compiler Restrictions
The compiler supplied with this RSK will build a maximum of 64k code and data. To use the compiler with
programs greater than this size you need to purchase a compiler license from your Renesas supplier.
8.3
Mode Support
The RL78/G1G microcontroller only supports single-chip operating mode.
8.4
Debugging Support
The E1 emulator (as supplied with this RSK) supports hardware break points, software break points and basic
trace functionality. For further details, refer to the E1/E20 Emulator User's Manual (R20UT0398EJ).
8.5
Address Space
For the MCU address space details, refer to the 'Memory Space' section of RL78/G1G Group Hardware
Manual.
R20UT3022EG0100 Rev. 1.00
Jan 15, 2015
8. Code Development
Page 33 of 38