Final Out-of-Box System Setup Screens
Configuring for Outside Line Calls
© Polycom, Inc. 2002
The following screens complete the initial system configuration of
your system.
Outside Line Calls. See
page
95.
Telephone Numbers. See
VS4000 Camera Setup. See
page
96.
Administrator Password. See
on page
97.
If your system is on a PBX, enter the number to dial for outside line
access on the Outside Line Calls screen.
Figure 3-19. Outside Line Calls Screen
This number is usually 9 or 0. The ViewStation FX or VS4000
automatically dials this number before your video numbers.
Leave this screen blank if you do not need to dial a number to access
an outside line. When you have finished, highlight the Save icon
and press the SELECT button on the remote control.
Chapter 3 - Initial System Setup
Configuring for Outside Line Calls on
Adding a Telephone Number on page
Setting up the VS4000 Camera on
Setting the Administrator Password
96.
95