Multipoint Conference Password; Setting Up The Meeting Password; Using The Meeting Password - Polycom ViewStation FX4000 User Manual

Multipoint Conference Password

Setting Up the Meeting Password

Using the Meeting Password

© Polycom, Inc. 2002
2. Select the MP Mode field. The Multipoint Setup screen
appears.
3. Select Auto, Discussion, Presentation, or Full Screen mode.
4. Press the MENU button on the remote control until you return
to the main screen.
A multipoint conference password is sometimes required for calls
dialed into your MCU or dialed out to a third-party MCU. The
ViewStation FX or the VS4000 can be configured to send or set the
Meeting Password as the multipoint conference password to the
MCU.
The Meeting Password works with the ViewStation FX or VS4000
system's embedded MCU and other external bridges that support
meeting passwords.
To set the Meeting Password as your multipoint conference
password:
1. From the main screen, select System Info > User Setup (or
System Info > Admin Setup > Security).
2. In the User Setup screen, under Meeting Password, enter your
password.
Your configured Meeting Password is automatically and
transparently sent as the multipoint conference password to the
multipoint conference.
The Meeting Password can be used for the following purposes:
To provide dial-in protection for the ViewStation FX or VS4000
MCU. If dial-in password protection has been set on the MCU,
Chapter 6 - Using Advanced System Features
229