Polycom ViewStation FX4000 User Manual page 308

ViewStation FX/VS4000 User Guide
310
• Yes—If Auto Answer Point to Point is set to Yes, any
incoming call will be connected automatically. In a
point-to-point call, the default is Yes.
• No—If Auto Answer Point to Point is set to No, the user
will be prompted with a message "You have a video call.
Would you like answer?" if there is an incoming call. This is
generally followed by a video number and a far-site name if
they are available. If the user selects Yes, the call will be
connected. If the user selects No, the call will be rejected.
• Do Not Disturb—If Auto Answer Point to Point is set to
Do Not Disturb, the user is not notified when there is an
incoming call. The site which placed the call will receive
either a "call rejected" or "dialed site busy" message.
Auto Answer Multipoint—This setting is used to determine
how the system will handle an incoming call in a multipoint
video conference. This setting only matters if the system is in a
call.
Select the appropriate option from the drop-down menu in the
Auto Answer Multipoint field. These options are No, Yes, and
Do Not Disturb and are described below:
• No—If Auto Answer Multipoint is set to No and there is an
incoming call, the user will be prompted with a message
"You have a video call. Would you like answer?" if there is
an incoming call. This is generally followed by a video
number and a far-site name if they are available. If the user
selects Yes, the call will be added into the ongoing
conference. If the user selects No, the call will be rejected.
The factory default is set to No.
• Yes—If Auto Answer Multipoint is set to Yes, any
incoming call will be connected automatically. The screen
will split into a multipoint call progress screen as the
incoming call is answered.
• Do Not Disturb—If Auto Answer Multipoint is set to Do
Not Disturb, the user is not notified of the incoming call.
The site which placed the call receives a Far Site Busy code
(H.320) or Call Rejected (H.323)
Mute Auto Answer Calls—When this option is selected, the
microphone pod is turned off to prevent the far site from
www.polycom.com