Accessing The System Screens; Configuring With The Setup Wizard - Polycom VSX 7000 Administrator's Manual

VSX 7000 Series Administrator's Guide

Accessing the System Screens

Configuring with the Setup Wizard

30
You can access the system to run the setup wizard or view the configuration
screens in two ways.
In the room with the system — Use the remote control to navigate the screens
and enter information. You can use the number pad on the remote control to
enter text just like you can with a cell phone.
From a remote location — Use a web browser to access the VSX web interface.
You need to know the IP address of the system. We recommend using
Microsoft ® Internet Explorer 6.0 or later.
To access the system via the VSX web interface:
1. Open a web browser on your computer.
2. In the browser address line, enter the system's IP address, for example,
http://255.255.255.255.
3. Enter the user name and administrator's password, if a password has been
established.
When you power on your system for the first time, the setup wizard detects the
system's IP and ISDN connections and leads you through the minimum
configuration steps required to place a call.
If you need more information about these steps, refer to the corresponding sections
in this chapter.
www.polycom.com/videodocumentation