Graphics Monitor - Polycom ViewStation FX4000 User Manual

Graphics Monitor

© Polycom, Inc. 2002
or slide stays on screen indefinitely until the user presses the
snapshot button on the remote control to return to live video.
If the Snapshot Timeout option is not disabled on both sides,
the ViewStation FX or VS4000 reverts to its default timeout of
four minutes.
Number of Monitors—This option lets you select the number
of monitors connected to your system.
Four monitors can be supported simultaneously in a multipoint
call. For more information about this feature, refer to
Four-Monitor Support on page
PIP—This option lets you select a Picture-in-Picture (PIP) mode:
• Auto: If you select Auto, the PIP appears and disappears
automatically depending on the position of the remote
control.
• On: If you select On, the PIP is displayed continuously.
• Off: If you select Off, the PIP is never displayed.
60 fields/sec (ITU) at > = 512Kbps (Wide Screen Video)
Enable this option to have the monitor display in wide screen
video format in IP and ISDN calls at 512 Kbps and above. This
option only works between ViewStation FX or VS4000 systems
with software version 4.0 and higher. Otherwise, if one of the
systems has a software version older than 4.0, the proprietary
letter box format is supported.
This screen lets you select the appropriate VGA monitor
configuration for your VGA monitor.
Appendix A - Screen Reference
Note
Note
233.
329