ViewStation FX/VS4000 User Guide
Snapshots
Sending Snapshots
Snapshot Timeout
208
This section explains how to send snapshots to the far site and how
to use the Snapshot Timeout feature.
You can send a snapshot from any local camera to the
participants in a videoconference by using the snapshot feature
on the ViewStation FX or the VS4000.S
To send a snapshot to meeting participants:
1.
Press the SNAPSHOT button on the remote control.
2.
Select a camera. Refer to
information about selecting cameras.
3.
Position the camera as necessary.
4.
Press the SNAPSHOT button on the remote control again. The
image is seen by all of the far sites in a call.
5.
To preview your snapshot before sending it, press the
SNAPSHOT button once and press 1, 2, or 3 for your desired
camera source. You see a live preview from the selected camera
while the far site still sees you.
6.
To send the image, press the SNAPSHOT button again.
By default, all slides and snapshots are displayed for a period of four
minutes. When the display times out after four minutes, the
ViewStation FX or the VS4000 automatically returns to live video.
However, when this option is disabled, the snapshot or slide stays
on screen indefinitely until the user presses the SNAPSHOT button
on the remote control to return to live video.
Controlling Cameras
for more
www.polycom.com