Vcr Setup; Figure A-11.Vs4000 Camera Setup Screen - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

VCR Setup

334
To access the VS4000 Camera Setup screen:
Select System Info > Admin Setup > Video/Camera > Cameras >
VS4000 Camera Setup. The following screen appears:
Figure A-11. VS4000 Camera Setup Screen
This screen lets you configure your camera equipment for the
VS4000 system only. You can connect four cameras to your VS4000.
However, you can set three cameras to S-video mode, and two to
pan/tilt/zoom mode.
To disable cameras:
Set your camera inputs as S-video or composite (VS4000 only),
1.
and enable pan/tilt/zoom capability on a camera.
Select the appropriate radio button or check circle.
2.
To access the VCR Setup screen:
www.polycom.com