Country; Setting Your Call Preference; Figure 3-4.Country Screen - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

Country

Setting your Call Preference

76
On the Country screen, select the country in which your
ViewStation FX or VS4000 is installed.
Figure 3-4. Country Screen
On the Call Preference screen, select the types of calls you can place:
V.35/RS-449 Video Calls or ISDN Video Calls:
• V.35 Video Calls—This option is available (see left picture
below) when your ViewStation FX or VS4000 is connected
to a V.35/RS-449 network.
ISDN Video Calls (H.320)—This option is available (see
•
right picture below) when your ViewStation FX or VS4000
is connected to a PRI or BRI network.
LAN/Internet Calls (H.323)—Select this option if you plan to
place IP calls.
If you enable this option later (after this initial system setup),
your system resets itself automatically and takes you through
the initial setup screens described in this section. Existing
system information is not erased during this process.
Note
www.polycom.com