Setup For The Pri Network Interface - Polycom ViewStation FX4000 User Manual

Setup for the PRI Network Interface

© Polycom, Inc. 2002
For more information about advanced V.35/RS-449 setup, see
Advanced V.35/RS-449 Network Interface
chapter 4.
The initial configuration process specific to the V.35/RS-449
network interface is complete. To continue with the initial
configuration process, skip to
Screens on page 95.
If you have a PRI network interface connected to your system,
the following initial PRI configuration screens will be displayed:
PRI Video Numbers. See
on page 88.
PRI Setup (E1). See
Protocols for E1 on page 88
PRI Setup (T1). See
During PRI configuration, the ViewStation FX or VS4000 detects
the PRI network module and updates the module, if necessary.
Chapter 3 - Initial System Setup
Configuration, in
Final Out-of-Box System Setup
Entering PRI Video Numbers (E1 - T1)
Setting up Line Signaling and Switch
Setting up PRI Options for T1 on page
Note
89.
87