Setup for the Quad BRI Network Interface
Entering ISDN Video Numbers
© Polycom, Inc. 2002
For more information about advanced PRI setup, see
PRI Network Interface Configuration on page
The initial configuration process specific to the PRI network
interface is complete. To continue with the initial configuration
process, skip to
Initial Setup for IP (H.323) Calls on page
If you have a Quad BRI network interface connected to your system,
the following initial BRI configuration screens are displayed:
ISDN Video Numbers. See
page
91.
Auto Detect SPIDs. See
on page
92.
ISDN Switch Protocol. See
on page
93.
On the ISDN Video Numbers screen, enter the area code or the STD
code and ISDN number assigned to your ViewStation FX or VS4000.
Your service provider should have given you this number when you
purchased your ISDN line.
Chapter 3 - Initial System Setup
Note
Entering ISDN Video Numbers on
Entering Service Profile Ids Manually
Selecting the ISDN Switch Protocol
Advanced
133.
78.
91